Non-rebated and reverse Doors with panelled frames represent an elegant and modern solution for interiors where the emphasis is on clean lines and minimalist design. Rebated doors do not have a rebate, which means that the door leaf is flush with the frame when closed, creating a uniform and harmonious appearance.
Reversing door They open in the opposite direction to standard doors, i.e. into the frame, which allows for space optimization and unification of room design. This design ensures that the door leaf is flush with the frame, which contributes to the modern and luxurious look of the interior.
Door frames for rebated and reversible doors are available in various designs, including a wide range of RAL, NCS and natural veneer shades, allowing them to be easily matched to the overall interior design. These frames can be manufactured with or without a lintel, with a solid or glazed transom, and with a mitred or butt joint corner, providing flexibility in interior design.
The doors are equipped with hidden hinges that are only visible when opened and allow adjustment in three directions to achieve a symmetrical gap between the door and the frame. The door can be installed with a classic mechanical or magnetic lock, with the magnetic lock ensuring quiet door operation.
DORSIS offers non-rebated a reverse door in full and glazed versions, with the option to choose from many types of glass. These doors are designed for heights up to 2700 mm, which allows them to be used even in rooms with higher ceilings.
Interior doors without rebates, also known as non-rebated doors, are increasingly popular on the market. These doors allow you to create a perfect plane with the cladding. When the door is closed, no hinges are visible because they are hidden. These hidden hinges are only visible when the door is opened and can be adjusted in three directions so that the gap between the door and the frame is symmetrical around the entire perimeter. The door can be installed with a classic mechanical lock or a magnetic lock and hidden 3D hinges.
Door frames are usually made in the same design as the door, in several options. We can offer door frames in a range of RAL, NCS shades or with natural veneer.
MAGNETIC LOCK AND COUNTERPLATE
- comfortable, quiet operation of the magnetic lock
– option for regular key, toilet latch and FAB
- adjustable counter plate for rectification
– magnetic lock and strike plate included in the price of the set
HIDDEN HINGES 3D
- possibility of adjusting hinges in 3 axes
– universal design for left and right doors
- load capacity 60kg / 2 hinges, 80kg / 3 hinges
– visible part of the hinges in white or matt nickel finish
– visible hinge caps matched to the hinge body
- sash opening angle 180 °
DESIGN DOOR HANDLES
– original design of handles by Griffwerk, Convex, Formani, M&T
– choice of several types of surface treatment
- Possibility of solution without bottom rosette
SLIDING FALL THRESHOLD OF THE DOOR DOOR
– increases the comfort of sound and thermal insulation
- range of sealing the joint under the wing 5-18mm
– only activated in the closed leaf position
- does not interfere with the design of the wing, integrated in the lower edge
OTHER ACCESSORIES AND SUPPLIES
– door leaf reinforcement with the possibility of rectification
- homalight door panel for increased noise insulation
– ventilation grille in RAL, aluminum or wood decor
TYPES OF GLASS FILLING
– clear glass and satinato white (the most used types of glass)
– other types of glass available in many decors
- possibility of engraving, printing, etc.…
We develop, custom-make and implement concealed door frames, including extra-high invisible doors to the ceiling and glazed variants, frameless building shells, all-glass sliding partitions, pivot doors and concealed LINUS skirting boards. Our products are a functional and design addition to commercial and residential interiors.
