GALLERY OF REALIZATIONS
INQUIRY FORM
We will create a free price offer for you, including an expert consultation on the technical solution of the project
wing strength | by type (10; 31; 40 mm) |
---|---|
passage height: | up to 3000 mm |
passage width: | up to 1500 mm |
door frame surface | according to the RAL sample |
door surface | according to the RAL sample according to the NCS template veneered version lacquered or oiled HPL frame DIGERO FRAME 3431 or 5831 (max width 1200mm for 8mm thick glass) all-glass thickness 10mm (max width 1300mm) |
possibility of fire protection variant | NE |
possibility of safety variant | NE |
possibility of acoustic variant | NE |
possibility of variant with cladding | NE |
BELPORT cases are supplied in the basic BASIC design with the option of ordering optional accessories.
To the basic set BASIC discounted additional sets can be ordered for nominal widths over 835 mm:
- AVANTGARDE (double-sided SOFT CLOSE)
- SUPERIOR (one-sided SOFT CLOSE and one-sided PUSHPLUS system)
Full wing
Glazed 4S
Line 3S
All-glass wing
All-glass sash in aluminum frame.
Doors in unlined building housings are exceptionally strong and stable thanks to the combination of solid construction and strong cladding.
Highly durable polyurethane door paint Innovative 5-layer, environmentally friendly paint technology. We use a 20% gloss and ABS paint edge with a smooth PRIMER layer.
MDF board 6 mm thick (competitive advantage, most manufacturers offer a thickness of only 3 mm).
Triple wooden frame
Honeycomb 29mm
highly durable polyurethane door paint
innovative technologies 5-layer varnishingthat are environmentally friendly.
We use a 20% gloss and ABS paint edge with a smooth PRIMER layer.
MDF board 6 mm thick (competitive advantage, most manufacturers offer a thickness of only 3 mm).
RAL and NCS shades
RAL and NCS shades, including high gloss
Natural veneers, CPL and HPL laminate
Finishing with wallpaper, concrete trowel and painting.
Door availability:
– in a range of shades according to the RAL swatch
– according to the NCS template
– lacquered or oiled HPL veneered version
– frame DIGERO FRAME 3431 or 5831 (max width 1200mm for 8mm thick glass)
– all-glass thickness 10mm (max width 1300mm)
Above-standard solid all-metal construction of the unlined housing for sliding doors. The unlined housing in single-leaf and double-leaf design is designed for both brick and SDK partitions
BELPORT cases are supplied in the basic BASIC design with the option of ordering optional accessories.
In addition to the BASIC basic set, it is possible to order discounted additional sets for nominal widths over 835 mm:
– AVANTGARDE (double-sided SOFT CLOSE)
– SUPERIOR (one-sided SOFT CLOSE and one-sided PUSHPLUS system)
rigid connection of the upper and stop part of the housing
upper part of the housing with built-in rail
case box for sliding sash (shown version for SDK partition)
set of trolleys and accessories (installed inside the box)
stop part
All-glass sliding sash
The visible aluminum edge of the housing can be finished by painting or spraying according to ral
Above-standard solid all-metal construction of the unlined housing for sliding doors. The unlined housing in single-leaf and double-leaf design is designed for both brick and SDK partitions
thanks to the absolute fusion with the wall, the case creates a unique impression of invisible doors. You can install the construction case in a plasterboard partition or in the masonry.
This design is great for spaces where there is less space and an open door leaf would be an obstacle. The sliding door leaf can be both wooden and glass - clear or sandblasted.
UNLOADED BUILDING CASES for sliding doors are already an integral part of a comprehensive solution with hidden door frames DURUS 45 a FORTIUS 52 and a hidden plinth LINUS bar.
Dorsis next door hidden door frames also offers sliding doors, both along the wall, so in the unlined housing. This design is great for spaces where there is less space and an open door leaf would be an obstacle. The sliding door leaf can be both wooden and glass - clear or sandblasted. But Dorsis is not just a design accessory. Dorsis has developed a system of doors and hidden door frames with fireproof, safety and acoustic resistance.
The trolleys are characterized by their smoothness and smoothness of operation; are tested for a service life of 100 sealing cycles.
As standard, we supply trucks with a load capacity of up to 120 kg.
The set contains all the components needed to hang and cover a glass wing 8-10 mm thick with a maximum weight of 80 kg.
The synchronous system allows you to control the movement of both door leaves at the same time with one hand. The system is suitable for wooden and glass wings. It is designed for wings up to 1235 mm wide.
Removable rail with adjustable rear stop; allows you to service even after installing the door leaf at any time in the future.
The one-sided damping brake decelerates the door leaf weighing up to 80 kg when closing abruptly and closes the leaf to the rest position. At the same time, it takes over the function of protection against pinching the fingers.
The central guide pin for the wooden leaf and the lower guide for the all-glass leaf guarantee safe and even operation of the door leaves.
The set contains all the components needed to hang and cover the wooden sash.
The housings are equipped with a removable rail with an adjustable rear stop. This allows service and maintenance to be carried out even after installation throughout its service life.